high?freq aluminum electrolytic hd series 9 nte electronics, inc. voice (800) 631?1250 (973) 748?5089 fax (973) 748?6224 http://www.nteinc.com subminiature (radial lead, horizontal deflection) the nte hd series of aluminum electrolytic non?polarized capacitors are designed specifically for horizontal deflec- tion current correction where high frequency and high ripple current occur. ratings capacitance range: 1.0 f to 10 f tolerance: 20% voltage range: 25 volts and 50 volts performance specifications operating temperature range: ?25 c to +85 c (?13 f to +185 f) leakage current: i 0.2cv (measured after 5 minutes of applied rated voltage) i = leakage current ( a) c = nominal capacitance ( f) v = rated voltage (v) capacitance tolerance: 20% (m) measured at +20 c (+68 f), 1kh z load life: 1000 hrs @ 12v dc, +70 c (+158 f), at specified ripple current leakage current: initial specified value or less dissipation factor: < 200% of specified value capacitance change: within 15% of initial value shelf life: 500 hrs @ +85 c (+185 f), no voltage applied leakage current: initial specified value or less dissipation factor: < 200% of specified value capacitance change: within 15% of initial value ordering information hd 4.7 m 50 series capacitance tolerance voltage mechanical specifications lead solderability: meets the requirements of mil?std 202, method 208 marking: consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identification, nte identification. recommended cleaning solvents: methanol, isopropanol ethanol, isobutanol, petro- leum ether, propanol and/or commercial deter- gents. halogenated hydrocarbon cleaning agents such as freon (mf, tf, or tc), trichloroe- thylene, trichloroethane, or methylchloride are not recommended as they may damage the ca- pacitor. case size and dimensions: d? ? insulating sleeve d ? l? 5.0 min 15.0 min a 0.5 hd series dimensions: diameter (d ?) x length (l): mm capacitance ( f) 25v and 50v ripple current* (a p?p ) 1.0 12.5 x 20 2.0 2.2 12.5 x 25 3.0 3.3 16 x 25 4.0 4.7 16 x 31.5 5.0 5.6 16 x 31.5 6.0 6.8 16 x 35.5 7.0 8.2 18 x 35.5 8.0 10.0 18 x 40 9.0 * allowable ripple current @ 70 c, 12v dc, and 15.75kh z hd mechanical specs: dimensions (mm) outside diameter (d ?) 12.5 16 18 lead spacing (a) 5.0 7.5 7.5 lead wire (d ?) 0.6 0.8 0.8
|
